Self-Assembly Guide
Jetson Orin Nano Field Kit by imply+infer
What's in the Box
Custom 3D-Printed Case
top + bottom
Dual IMX219 Stereo Camera
CAM0 · CAM1
NVMe SSD
M.2 · 256GB
TP-Link AC600 USB WiFi
8821cu
Assembly Steps
1
Install NVMe SSD
Board upside-down. Insert drive into M.2 slot at angle, press flat, secure screw.
2
Plug in USB WiFi
Seat AC600 adapter fully into a USB port on the carrier board.
3
Attach CSI Cables
Lift latch gently → insert orange ribbon (contacts inward) → close latch. Ports: CAM0 CAM1
4
Mount in Case
Route CSI cables → seat board in top half → attach bottom cover with screws (cross pattern).
5
Power On & Connect
Connect 19V power → press power button → wait 1–2 min → join WiFi JetsonFieldKit or SSH box@box.local. See docs at implyinfer.com/docs
Power off during assembly
·
Do not overtighten screws
·
CSI latch care